Infomaker 10.0 report - proper alignment - 2 fields stacked one above the other

[Terry Dykstra [TeamSybase]]

Place the 2nd field below the first one. It will slide up if field 1 is
empty. You want to set the height of the detail band toshow only field 1 in
design mode. The band will automatically increase in size when field 1 and 2
are both displayed. Remember, autosize height only works in one direction:
bigger.

Terry Dykstra [TeamSybase]

Please open the attached jpg. I have two fields 'stacked'
one
on top of the other in the detail section of my report. The
first field is set to 'autosize'. The Slide Up setting in
the
second field is set to 'directly above'. How do I get the
second field to drop below the first field and display
correctly?

[unknown]

The second field is placed below the first one. I changed
the height of the detail band to only show the first field.
There was no change in how the data is displayed. Also, If
the first field is empty, I don't want the second field to
slide up.

Post by Terry Dykstra [TeamSybase]
Place the 2nd field below the first one. It will slide up
if field 1 is empty. You want to set the height of the
detail band to show only field 1 in design mode. The band
will automatically increase in size when field 1 and 2
are both displayed. Remember, autosize height only works
in one direction: bigger.
Terry Dykstra [TeamSybase]

the attached jpg. I have two fields 'stacked' one
on top of the other in the detail section of my report.
The first field is set to 'autosize'. The Slide Up
setting in the
second field is set to 'directly above'. How do I get
the second field to drop below the first field and
display correctly?

[unknown]

How do I fix this issue?

Post by unknown
The second field is placed below the first one. I changed
the height of the detail band to only show the first
field. There was no change in how the data is displayed.
Also, If the first field is empty, I don't want the second
field to slide up.

Post by Terry Dykstra [TeamSybase]
Place the 2nd field below the first one. It will slide
up if field 1 is empty. You want to set the height of
the detail band to show only field 1 in design mode.
The band will automatically increase in size when field
1 and 2 are both displayed. Remember, autosize height
only works in one direction: bigger.
Terry Dykstra [TeamSybase]

open the attached jpg. I have two fields 'stacked'
one on top of the other in the detail section of my
report. The first field is set to 'autosize'. The
Slide Up setting in the
second field is set to 'directly above'. How do I get
the second field to drop below the first field and
display correctly?